The Contech Collating Sheeter Stacker is a marvel of efficiency: it is specially designed to handle heavy-duty work loads.
This machine utilizes a series of heavy duty A frame unwinds with a dedic… More info
5 Station unwind and single station powered rewind
Hinged one side for easy access to internal rolls
500 lb. cap.Ea. unwind or rewind
3” core inserts o… More info
System Integration at its best!
Contechs Custom Increment System, Servo Drive, Unwind and Rewind added to AWT’s Screen Press and Infa-red Conveyor Dryer. Contech is welcomes the opportunity… More info
This Hitch Feed is designed to attach to a Hitch Feed Press. The system is a Servo conveyor belt, and the input side and the output side run in unison.
The material is clamped to the belt while it… More info
This press has a reciprocating belt that is die cut on. It is variable frequency drive that controls the movement of the belt. The input side has a clamp that holds material to the belt so multiple l… More info
The system is composed of three main modules, the Unwind modules, the Sheeter module and the Stacker module.
Material Unwind Modules
Each unwind module consists of an inflatable support shaft, t… More info
Unwind one feeds straight into machine while unwind two feeds in 90 degrees from unwind one. The webs are set up to run through an automatic splice station that allows the operator to tag on the next… More info
This laminator is a protective film laminator that automatically sets the gap between sheets and hot wire cutoff between the gap. This laminator also had an optional reject sheet conveyor. More info
The cross cutter is designed as a free standing unit that can monitor an incoming web of material and cut it off at a preset length. The unit will be controlled by an AB PLC. It will receive speed … More info
System shown was designed to meet customer requirements for speed and continuous operation. Material is received inline from plastics extruder to accumulator, then fed into the sheeter. Sheeted mater… More info
Rotary Die Cutter with dual turret unwind, feeding one roll at a time. Inline heated splice station. The web is fed into the rotary die cutter. There are three components to this die cut operation.
… More info
Operation theory for Roll Loader.
There are two modules in this project. The first is a loading cart for the film that is used to wrap the finished rolls. A shaft with 3” chucks is inserted into… More info
The system has been designed to operate in three separate modes:
1. In what is referred to as strip mode, the system is configured to punch washers from hand-fed laminated sheets (called strips) o… More info
The objective of the machine is to apply corrugated material to the full length of a garage door panel, then deliver panel for further processing. To do this, the system is composed of an Entry Nip S… More info
60” Slitter Rewinder with 20” rewind diameter capacity. The system will use an unwind stand (see Unwind specification), and Tidland Class II E-Series Shear Slitting.
Tension controls managing … More info
The Omega Slitter Re-winder System pictured above offers a heavy duty unwind complete with Auto Roll Lift and Shaft-less capability. This unwind will be a stand alone unit that is attached to the sl… More info
The purpose of this machine is to laminate fiberglass webs together at 90 degrees to each other, tack weld them together ultrasonically, and either sheet or rewind the finished product. The webs come… More info