This Hitch Feed is designed to attach to a Hitch Feed Press. The system is a Servo conveyor belt, and the input side and the output side run in unison.
The material is clamped to the belt while it… More info
This press has a reciprocating belt that is die cut on. It is variable frequency drive that controls the movement of the belt. The input side has a clamp that holds material to the belt so multiple l… More info
Unwind one feeds straight into machine while unwind two feeds in 90 degrees from unwind one. The webs are set up to run through an automatic splice station that allows the operator to tag on the next… More info
Designed for high speed continuous 24 hour, 7 days a week operation.
Processes rolls of material into sheets at up to 1,000 ft/min depending on material.
Rotary single or dual knife fixed-bed cutter … More info
Servo drive operation.
Speeds up to 300 feet per minute depending on increment length.
Increments as small as 1/4”, up to 120”.
Tolerance of +/- .015”.
Down-acting scisso… More info
Servo drive with operator display
Programmable speed with acceleration/deceleration selects
Heavy duty down acting scissor shear cutting blades
Interface… More info
Omega Ultra Press Overview
Hydraulic Power Unit
The hydraulic system incorporates an electronically controlled variable displacement pump to generate hydraulic power. Valves direct and control hydr… More info
The Surface Slitter Rewind unwinds a roll of material then rewinds it back on a common shaft. There is a lay on roller that keeps slit material from over lapping on itself during the rewind process. … More info
Contech’s Galaxy Heat Vacuum Applicator is an excellent option for manufacturers intending to apply laminates to the interior panels of aircraft. If you are interested in an efficient and affor… More info
Efficiency and ease- of-operating define the Carousel Unwind Dancer. This machine runs individual Prestige rolls through a time-powered unwind that dispenses material to the sheeting unit. When the c… More info