This Hitch Feed is designed to attach to a Hitch Feed Press. The system is a Servo conveyor belt, and the input side and the output side run in unison.
The material is clamped to the belt while it… More info
This press has a reciprocating belt that is die cut on. It is variable frequency drive that controls the movement of the belt. The input side has a clamp that holds material to the belt so multiple l… More info
This press is a web fed press with an inspection splice station. Material comes off of the unwind through the inspection station where the operator marks on the material if there is a flaw in the mat… More info
Unwind one feeds straight into machine while unwind two feeds in 90 degrees from unwind one. The webs are set up to run through an automatic splice station that allows the operator to tag on the next… More info
This laminator is a protective film laminator that automatically sets the gap between sheets and hot wire cutoff between the gap. This laminator also had an optional reject sheet conveyor. More info
Designed for high speed continuous 24 hour, 7 days a week operation.
Processes rolls of material into sheets at up to 1,000 ft/min depending on material.
Rotary single or dual knife fixed-bed cutter … More info
Servo drive operation.
Speeds up to 300 feet per minute depending on increment length.
Increments as small as 1/4”, up to 120”.
Tolerance of +/- .015”.
Down-acting scisso… More info
Servo drive with operator display
Programmable speed with acceleration/deceleration selects
Heavy duty down acting scissor shear cutting blades
Interface… More info
Omega Ultra Press Overview
Hydraulic Power Unit
The hydraulic system incorporates an electronically controlled variable displacement pump to generate hydraulic power. Valves direct and control hydr… More info
Sheeter with Output Conveyor and Casters and Sheeter with conveyor only More info
Sheeter with large capacity unwind and over head loading system. Machine has a pacer drive system to pull material off of the unwind and feed it into sheeter various slitting styles available on the … More info
Single or dual unwind – weight capacity up to 100 lbs
Power Unwind – 500 lb. single or dual.
Photo Eye – Pre-stages your next sheet.
Pendant – 3 or 6 button
Width s… More info
2 each Unwind for laminate with 3” core and simple mechanical slip clutches. (Maximum 8: OD = 62” wide)
2 each Rewind for the carrier paper on the laminate if there is one. (Max… More info
Eliminates Tedious Hand Masking
Adjustable Tension Control
Guide Bar Alignment
Dual Rubber Rollers
Adjustable Nip Roll Pressure
Front and Re… More info
Hot or Cold Models Available
Web Tension Control
Foot Switch Control
Options: Heat Bar Assembly, Loading Conveyor, Unloading Convey… More info
Contech’s Galaxy Heat Vacuum Applicator is an excellent option for manufacturers intending to apply laminates to the interior panels of aircraft. If you are interested in an efficient and affor… More info
On this rewinder the roll stands vertical has programmable length counter with the air actuated cut off. Rewind shaft is air inflated trapper leaf style so there is no core to wind on.
Variable … More info
Rewinder with large OD roll capacity with optional web auto web guide, can be used to straighten out rolls that have been telescoped or can be used to create smaller rolls from a master roll. More info
Slitter Rewinder with 20 rewind diameter capacity. The system will use an unwind stand (see Unwind specification), and Tidland Class II E-Series Shear Slitting.
Tension controls managing the Drive… More info
Efficiency and ease- of-operating define the Carousel Unwind Dancer. This machine runs individual Prestige rolls through a time-powered unwind that dispenses material to the sheeting unit. When the c… More info