5 Station unwind and single station powered rewind
Modular design
Hinged one side for easy access to internal rolls
500 lb. cap.Ea. unwind or rewind
15” O.D.
3” core inserts o…
More info
This Hitch Feed is designed to attach to a Hitch Feed Press. The system is a Servo conveyor belt, and the input side and the output side run in unison.
The material is clamped to the belt while it…
More info
This press has a reciprocating belt that is die cut on. It is variable frequency drive that controls the movement of the belt. The input side has a clamp that holds material to the belt so multiple l…
More info
This press is a web fed press with an inspection splice station. Material comes off of the unwind through the inspection station where the operator marks on the material if there is a flaw in the mat…
More info
Unwind one feeds straight into machine while unwind two feeds in 90 degrees from unwind one. The webs are set up to run through an automatic splice station that allows the operator to tag on the next…
More info
Servo drive operation.
Speeds up to 300 feet per minute depending on increment length.
Increments as small as 1/4”, up to 120”.
Tolerance of +/- .015”.
Down-acting scisso…
More info
Standard Features:
Servo drive with operator display
Programmable speed with acceleration/deceleration selects
Heavy duty down acting scissor shear cutting blades
Various widths
Interface…
More info
Omega Ultra Press Overview
Hydraulic Power Unit
The hydraulic system incorporates an electronically controlled variable displacement pump to generate hydraulic power. Valves direct and control hydr…
More info
Sheeter with Output Conveyor and Casters and Sheeter with conveyor only
More info
Single or dual unwind – weight capacity up to 100 lbs
Power Unwind – 500 lb. single or dual.
Photo Eye – Pre-stages your next sheet.
Pendant – 3 or 6 button
Width s…
More info
The Surface Slitter Rewind unwinds a roll of material then rewinds it back on a common shaft. There is a lay on roller that keeps slit material from over lapping on itself during the rewind process. …
More info
Magna SR offers a low cost work horse with deluxe features. CONTECH’s exclusive variable frequency drive system provides quick and easy setup and variable run speeds of up to 750 fpm. Unique ca…
More info
Economical means of slitting material to various widths machine cuts with a 10 inch circular blade optional auto incremental attachment makes reparative cuts easier.
More info
2 each Unwind for laminate with 3” core and simple mechanical slip clutches. (Maximum 8: OD = 62” wide)
2 each Rewind for the carrier paper on the laminate if there is one. (Max…
More info
Eliminates Tedious Hand Masking
Variable Speed
Forward/Reverse Capability
Adjustable Tension Control
Guide Bar Alignment
Dual Rubber Rollers
Adjustable Nip Roll Pressure
Front and Re…
More info
Hot or Cold Models Available
Variable Speed
Adjustable Pressure
Web Tension Control
Adjustable guides
Foot Switch Control
Options: Heat Bar Assembly, Loading Conveyor, Unloading Convey…
More info
Contech’s Galaxy Heat Vacuum Applicator is an excellent option for manufacturers intending to apply laminates to the interior panels of aircraft. If you are interested in an efficient and affor…
More info
On this rewinder the roll stands vertical has programmable length counter with the air actuated cut off. Rewind shaft is air inflated trapper leaf style so there is no core to wind on.
Variable …
More info
Rewinder with large OD roll capacity with optional web auto web guide, can be used to straighten out rolls that have been telescoped or can be used to create smaller rolls from a master roll.
More info
Slitter Rewinder with 20 rewind diameter capacity. The system will use an unwind stand (see Unwind specification), and Tidland Class II E-Series Shear Slitting.
Tension controls managing the Drive…
More info
Efficiency and ease- of-operating define the Carousel Unwind Dancer. This machine runs individual Prestige rolls through a time-powered unwind that dispenses material to the sheeting unit. When the c…
More info
SPECIFICATIONS
Cantilevered Unwind with Web guide Maximum weight 1150 lbs (515kg)
6” Air shaft
Maximum diameter: 33.5” (850mm) Maximum web width: 40” (1000mm) Minimum web wid…
More info